User manual

Securing Your Child
7 Gently pull up on the harness
straps to tighten the lap section of
the harness, which should fit low
on your child's body (fig. D).
8 Slowly pull the adjuster strap to
tighten the harness around the
child (fig. E).
IMPORTANT: Harness should have
a comfortable, but SNUG fit
around the child. A snug fit allows
you to place two fingers between
your child's body and the harness.
9 F asten the chest clip by connect-
ing the two halves together.
IMPORTANT: The correct height
for the chest clip is at the middle of
the chest, level with the child's
armpit.
10 Verify that harness is not twisted
and child is properly secured (fig. F) .
11 See Checking Harness Height on
page 33.
D
E
F
32
FAGalaxy_page proof 2/9/02 11:17 AM Page 32