Instruction manual

Instructions for Installation & Use - Series No. 4900/A/2010

HOW TO INSTALL

INSTALLING INTO VEHICLE

A. Position the restraint in the car forward facing in the

chosen seating position. Adjust the headrest to the

correct height for your child (refer to page 11). Ensure

the seating position has a child restraint anchorage

tting. Refer to the car owner's handbook. If no tting is

provided refer to anchor tting information on pages 38

to 40.

B. Lengthen the upper anchorage strap by removing the

excess strap from the storage band, then press the

adjuster button (1) and pull the strap with the attachment

clip (2). Hook the attachment clip to the anchor tting.

Make sure to remove any twists from the Upper

Anchorage Strap.

C. Tighten Adjustable Upper Anchorage Strap by pulling

adjusting strap (3) to remove slack. Do not tighten

causing the restraint base to lift off the vehicle seat.

D. Fold up excess strap and use storage band to neatly store

away from child's reach and secure with the hook and

loop storage strap.

Always attach hook and remove slack.

Attachment Clip

Anchor

Fitting

Fold up excess

strap and store with

the storage band.

Storage

Band

Storage

Band

Pull to remove slack