User guide

42 43
Care and Maintenance
Cleaning the Cover
• HAND WASH the cover using cold water and mild soap.
• LINE DRY to prevent the cover from shrinking.
• DO NOT:
* Bleach
* Machine wash
* Machine dry
* Iron
Cleaning the Harness
• SPONGE CLEAN the harness using warm water and mild soap.
• TOWEL DRY
• DO NOT:
* Disassemble the harness
* Bleach
* Machine wash
* Machine dry
* Iron
Cleaning the Shell
• SPONGE CLEAN the shell using warm water and mild soap.
• TOWEL DRY
• DO NOT use abrasive cleaners.
Replacing the Cover
1 Pull the elastic bands over the
hooks on the bottom of the
child seat shell.
3 Pull the seat cover forward
and push the EZ-Buckle belly
pad through the appropriate
slot in the seat cover. Hook the
clips at the back of the seat
cover to the child seat shell.
2 Hook the clips at the front of
the seat cover to the bottom of
the child seat shell.
4 Fit the cover over the
CLICKTIGHT and pull the
elastic band over the hook on
the bottom of the CLICKTIGHT.
7 Pull the bottom elastic bands
over the hooks at the bottom
of each side of the head
restraint.
5 Close the CLICKTIGHT.
* A click confirms the
CLICKTIGHT is secure.
6
Fit the side wing cover to the
child seat shell and pull the
elastic band over the hook at
the top of the child seat shell.
Repeat for the other side.
8 Fit the head restraint cover
over the head restraint and
pull the top elastic bands
over the hooks at the top
of each side of the head
restraint.
9 Attach the hook and loop
fasteners on the head restraint
cover around the harness.
Care and Maintenance