User guide

34 35
Care and MaintenanceCare and Maintenance
Removing the Cover
1 Loosen the harness.
a Lift harness adjuster lever
b Pull both harness straps forward
11
Detach the plastic hooks from
the back of the child seat
shell.
2 Open the chest clip.
a Press tabs
b Pull apart
3 Unbuckle the harness.
4 Remove the infant body pillow
if necessary.
5 Remove the belly pad and
buckle.
a Lift the cover from the seat to find
the buckle strap connection.
WARNING!
• Never remove the buckle tongues from the harness. They cannot
be reattached after removal. If reassembled incorrectly, the child
seat may not perform as intended.
• DO NOT remove the HUGS™ chest pads from the harness straps.
12 Remove the cover from the
shell.
7 Raise the harness to the
highest position and detach
the elastic straps from the tabs
behind the harness height
adjuster.
8 Remove the head pad.
9 Detach the plastic hooks from
the bottom edge of the child
seat.
10 Adjust the harness to the
lowest position.
6 Detach the hook and loop
fasteners on the head pad
from around the harness.
2a
2b
1b
1a
6
9
7
11
12
b Remove the buckle strap by
turning the buckle retainer
sideways and routing it out of the
front buckle slot in the child seat
(Page 38).
c Slide the end of the belly pad out
from under the foam pad on the
seat.
d Pull the end of the belly pad and
buckle retainer out of the buckle
slot in the cover to remove.
5a
5b
5c
5d
5e
e Turn the buckle retainer sideways
and slide the buckle out of the
belly pad.