User guide

36 37
Replacing the Cover
Care and MaintenanceCare and Maintenance
d Turn the buckle retainer
sideways and route it through
the front buckle slot and then
into the desired buckle position
in the child seat.
2
Attach the plastic hooks
behind the head pad onto the
child seat.
3 Replace the belly pad and
buckle:
a Turn the buckle retainer sideways
and route it through the belly
pad.
b Route the belly pad and buckle
retainer through the buckle slot
in the cover.
* Ensure that the buckle is through
the correct cover slot for the buckle
position.
c Slide the end of the belly pad
under the comfort foam on the
child seat.
4
Attach the plastic hooks to
the bottom edge of the child
seat.
5 Slide the head pad cover over
the harness height adjuster
and attach the elastic straps to
the rear tabs.
1 Fit the child seat cover around
the child seat shell.
1
2
Cleaning the Cover
• HAND WASH the cover using cold water and mild soap.
• LINE DRY to prevent the cover from shrinking.
• DO NOT:
* Bleach
* Machine wash
* Machine dry
* Iron
Cleaning the Harness
• SPONGE CLEAN the harness using warm water and mild soap.
• TOWEL DRY
• DO NOT:
* Disassemble the harness
* Bleach
* Machine wash
* Machine dry
* Iron
Cleaning the Shell
• SPONGE CLEAN the shell using warm water and mild soap.
• TOWEL DRY
• DO NOT use abrasive cleaners
6 Attach the hook and loop
fasteners on the head pad
cover around the harness
straps.
3a
4
5
6
3c
3d