User guide

12 13

Child Seat Functions Child Seat Functions

Adjusting the Harness Height

1 Loosen the harness.

a Lift harness adjuster lever

b Pull both harness straps forward

NOTE: In rear-facing mode, always position the harness straps at

or below your child’s shoulders. See page 5.

In forward-facing mode, always position the harness straps at or

above your child’s shoulders. See page 5.

1 Unbuckle the harness. Remove

the belly pad and buckle. See

page 38, steps 1a - 1d.

IMPORTANT:

• ALWAYS position the buckle in the

inner slot for rear-facing use when

using a vehicle seat belt installation.

• The vehicle belt must pass in front of

the buckle strap for rear-facing use.

• Position the buckle in the slot closest

to but not under the child for rear-facing use when using the

LATCH installation.

• NEVER leave the buckle in the adjustment slot.

• Use the outer buckle slot when installing the child seat forward-

facing with a child weighing 13.6 kg (30 lbs) and above or if the

buckle is under the child in the inner position.

ADJUSTMENT

SLOT

Adjusting the Buckle Position

2 Route the belly pad and buckle

through the desired slot in the

cover.

* Slide the end of the belly pad

under the comfort foam.

3 Slide the buckle retainer into

the front buckle slot and slide

into the corresponding buckle

position. Ensure the red release

button faces out. Replace

cover.

2 Squeeze the harness height

adjuster, slide the harness

into the desired position and

release.

* Ensure the harness has locked

into position.