Owner's Manual

54
QUICKSTART GUIDE
QUICK SETUP GUIDE
Important: With all large speakers, an initial “break -in” period is needed to perform at optimal levels.
To properly “break-in” your Transactiv e Mobile, play an audio source at medium volume
for a few hours.
lineout to another amp
linkto another 8OHM box
RCA form CD or other
6.35 plug form MIC or guitar
XLR form MIC
Mobile phone or pad
linein from another amp or mix
BT
Technical specification:
1. AUX input:-10dB;
2. MIC input:-40dB;
3. EQ：±12dB,100Hz，330Hz，1KHz，3.3KHz，10KHz;
4. Distortion：.+]
 1RLVH：-40dB;
 61：80dB;
 3RZHU:
 9ROWDJH：9+]a9+]
LINE
OUT
The Speaker output marked Speaker Out is used to connect the active unit to the
passive unit. Passive speaker impedance must always be 8 ohms.
Speaker Output Connection
Line Out Balanced Connection
POWERED
SPEAKER
POWERED
SUBWOOFER
AMPLIFIER
The XLR Line out allows you to output the amplier signal to subwoofer, another powered
speaker, or an amp, which will, in turn, power other speakers. Simply connect the output
device to the RPG225K using an XLR to XLR or XLR to ¼ TRS cable to share the signal.
We recommend you use high quality cables
BT pairing
0HGLD&DUG