Owner's Manual
36
Limited Warranty
This Limited Product Warranty is provided by BriteLite Enterprises.
BriteLite warrants to Customer that the product is free from defects in
materials and workmanship under normal use during the Warranty
Period of 90 days for parts and 1-year labor. If the product fails to con-
form to the warranty then BriteLite or its authorized service will either
repair or replace any nonconforming product, provided that Customer
gives notice of noncompliance within the Warranty Period to BriteLite by
emailing service@britelite net or calling 310-363-7110 (Mexico custom-
ers can call 0155 46240251). Please retain the original dated receipt as
evidence of proof of purchase
2. 5-band graphic equalizer
3. Channel 2
8. Line Out
7. Auxiliary/Line Input
1. Main Channel Controls
6. Master Volume Controls
5. Main Channel volume
10. Speakon output to passive speaker (8 ohm)
9. LED Light Swich
11. Voltage selector switch
13. Power switch
12. Power input
Use this switch to turn the unit on and off.
Use this switch to turn the Sound Activated Multicolor LED lights on and off.
Control the sound output coming of all channels.
LEVEL: Controls the volume of Channel 2
All three channels can be used at the same time. Both inputs on this channel can be used
at the same time
4. Channel 3
All functions operate the same as Channel 2
Control the volume of the music coming from the main channel( BT/AUX/USB/SD/FM)
Control the Volume, Bass, and Treble of the sound coming from all three channels
Use this jack to connect a passive speaker using an NL4 “twist lock” audio cable. Note that
the signal from this output is amplied.
Switches the input voltage. Make sure to be use the correct voltage corresponding to the
voltage coming from your wall outlet.
Connect one end of the included power cable to this input and the other end to a wall outlet.
Make sure the voltage switch is in the correct position before turning on the unit.
XLR Input: Connect an audio source using an XLR cable on Channel 2.
1/4"Input: Connect an audio source using a 1/4” audio cable on Channel 2.
The XLR Line Out sends a signal to a subwoofer, another powered speaker, or to an amp.
Play music from an auxiliary device when the main channel is in aUX mode. Both inputs can be
used at the same time.
LR Input: Play music from an audio sorce using an RCA cable
XLR: Play music from an audio source using an XLR cable
The main channel can play music from an Auxiliary source, Bluetooth, USB/SD Card, or FM Radio.
MODE: Switches between the input modes mentioned above.
PLAY: Press this button to play or pause music playing from Bluetooth, USB, or SD.
FOLDER: Use this button to pick an Equalizer preset or choose a song to play from your USB/SD
card. Use the Prev/Next buttons to switch though menu items and press the play button to select
a menu item.
REPT: Turn the repeat function on and off for music playing through USB or SD
PREV/NEXT: Use these buttons to switch through songs playing on Bluetooth or USB/SD or
channels in FM Radio mode