Quick Start Guide

Bluetooth pair and connect

● Turn off any Bluetooth devices previously paired (linked) with this unit.

● Turn on the Bluetooth feature on your phone or music player.

● Turn on and set this unit to Bluetooth mode. The flashing :“bt” on LED display

indicates it is in pairing mode.

● Set your phone or music player to search for Bluetooth devices.

● Select “Party System EP-80" from search results on your phone or music player.

● Select OK or YES to pair this unit with your phone or music player.

● If protected, enter 0000 for passkey steady blue light indicates successful connection.

● Hold pair key to disconnect current convection and eater pairing mode.

TWS (True Wireless Stereo) mode

1. Turn on 2 speaker equipments and select both unit INPUT mode as Bluetooth

2. Press "TWS" key on speaker set for 2 seconds, it will show " " on display, TWS is

connecting to another speaker equipment and will connect successfully after a

sound indication or display shows "bt"

3. Turn on your Bluetooth feature on your mobile phone to search Bluetooth devices

and select “Party System EP-80" from the search result, select OK or YES to pair this

unit with your mobile phones and a steady blue light will indicate the connection is

successful and can play any music from your mobile phones.

4. Press "TWS" key on speaker unit for 2 seconds and it will turn off TWS features after

shows " " on display.

(The "LEFT" channel will be the speaker A, the other speaker will be the "RIGHT" channel.)

FM Radio Operation

1. Before using the radio functions, you must attach the supplied antenna. Adjust the

antenna to obtain optimum reception.

Press [SOURCE] repeatedly to select FM mode.

2. Press the CH+/CH- key on the remote control or the key” / ” on the topHold

panel to skip to the preset sttation.

3. Press the TU+/TU- key on the remote control or press the key” / ” on the top

panel to adjust the radio frequency manually.

The number key on the remote control can directly select the frequency. Such as enter

“8,8,1" keys for 88.1MHz, ”1,0,4,0" keys for 104.0MHz.

4. Press the PLAY key on the remote control or Press the key” ” on the top panel, the

machine will scan radio channels from low-frequency to high-frequency by itself and

memorize the channels one by one.

BATTERY

In AC ( power) mode the battery will automatically charge. A slow red flashing light

indicates that the battery is charging. When fully charged a green light will be displayed.

In DC ( battery) mode a green light indicates that the battery level is full. If the battery

level is low a red light will be displayed. This indicates that the battery must immediately

be charged or the speaker will turn off.