User guide

5-
3.2 Main Function
To select any of the given functions, press the MENU button up to when the required one is
showing on the display. Select the function by ENTER button and the display will blink. Use
DOWN and UP button to change the mode. Once the required mode has been selected,
Press ENTER button to store. Back to the main functions without any change press the
MENU button or wait for 1 minute.
Hold MENU button to exit menu mode, the
unit will run the built-in program you
selected At this time you can press UP and
DOWN button to change show, the new
show will effect immediately. If you change
to show 1-8 or Auto Fade, you can press
ENTER button to choose speed. The unit
will run in the speed selected or it will run to
the music.
The main functions are shown on the
drawing:
DMX Address
Press the MENU button up to when the
DMX Address is showing on the display.
Press ENTER button and the display will
blink. Use DOWN and UP button to change
the DMX512 address. Once the address
has been selected, press the ENTER
button to store. Back to the main functions
without any change press the MENU
button (or wait for 1 minute to exit menu
mode).
Channel Mode
Press the MENU button up to when the
Channel Mode is showing on the display.
Press ENTER button and the display will
blink. Use DOWN and UP button to select