Datasheet

Location
You need to place your BT Studio 3100 within 2 metres of the
mains power socket and telephone socket so that the cables
will reach.
Make sure it is at least 1 metre away from other electrical
appliances to avoid interference.
Your BT Studio 3100 works by sending radio signals between
the handset and base. The strength of the signal depends on
where you site the base. Putting it as high as possible can
help to provide the best signal.
Setting up the base and handset
1. Plug the power adaptor and telephone cable into the back of
the base.
BT Studio 3100 – Issue 1 – Edition 01 – 24.01.07 – 8004
WARNING
Do not place your BT Studio 3100 in
the bathroom or other humid areas.
Handset range
The BT Studio 3100 has a range
of up to 300 metres outdoors when
there is a clear line of sight between
the base and handset. Any obstruction
between the base and handset will
reduce the range significantly.
With the base indoors and handset
either indoors or outdoors, the range
will normally be up to 50 metres.
Thick stone walls can severely affect
the range.
Signal strength
The icon on your handset display
indicates when you are in range of
the base. When it flashes and you
hear a warning beep, you are out of
range and will need to move closer
to the base.
IMPORTANT
Do not connect the telephone line
cord to the telephone line wall socket
until the handset is fully charged.
Only use the telephone line
cord provided.
The base station should be plugged
into the mains power socket at all
times.
Getting started 6
If you experience any problems, please call the Helpline on 0870 605 8047 or email [e-mail]
8474 Studio 3100 UG Iss2 [2] 25/10/07 16:38 Page 6