Installation Sheet

ManualsBrandsBrizo ManualsKitchen FaucetsBrizo Litze Single Handle Angled Spout Pull Down Kitchen Faucet with Industrial Handle - Limited Lifetime Warranty

PULL-DOWN KITCHEN FAUCET

LLAVE DE AGUA/GRIFO EXTRAÍBLE

PARA COCINAS

ROBINET À BEC RÉTRACTABLE POUR

ÉVIER DE CUISINE

LITZE™

Models/Modelos/Modèles

For easy installation of your Brizo

faucet you will need

to READ ALL warnings, care, and maintenance information

before beginning.

Installation Requirements:

Hole Diameter: 1 3/8" ± 1/4"

Maximum Deck Thickness: 3" (76 mm)

• With Escutcheon: 2 3/4" (70 mm)

• Thin Gauged Sinks: Use Thin Deck Aid RP37490

Write purchased model number here.

Escriba aquí el número del modelo comprado.

Inscrivez le numéro de modèle ici.

05/6/2017 Rev.C

91810

pSpecify Finish/Especifíque el Acabado/Précisez le Fini

63043LFp 63053LFp 63063LFp

63044LFp 63054LFp 63064LFp

RP79275p

Soap/Lotion Dispenser

Dispensador de jabón/loción

Distributeur de savon ou de lotion

RP71451p

Escutcheon

Chapa

Plaque de finition

Accessory Order Only

Solo para ordenar accesorios

Accessoire livrable séparément

www.brizo.com

1-877-345-BRIZO (2749)

brizosupport@brizo.com

Para facilitar la instalación de su grifo Brizo®, antes de

comenzar deberá LEER TODAS las advertencias, infor-

mación sobre el cuidado y el mantenimiento.

Requisitos para la instalación:

Diámetro del agujero: 1 3/8" ± 1/4"

Grosor máximo de la encimera: 3" (76 mm)

• Con la chapa de cubierta: 2 3/4" (70 mm)

• Para encimeras de menos grosor: Use la pieza para

encimeras delgadas RP37490

Pour installer votre robinet Brizo

facilement, vous devez

LIRE TOUTES les mises en garde ainsi que les instructions

d’entretien et de maintenance avant de débuter.

Exigences d’installation :

Diamètre du trou : 1 3/8 po ± 1/4 po

Épaisseur maximale de la plage : 3 po (76 mm)

• Avec plaque de finition : 2 3/4 po (70 mm)

• Éviers minces : utilisez la plaque de renfort RP37490

For product & installation questions, do not return to the store. For additional help, contact customer service.

Si tiene preguntas sobre el producto y su instalación, no acuda a la tienda. Para ayuda adicional, comuníquese con el departa-

mento de servicio al consumidor.

Si vous avez des questions au sujet du produit et de l’installation, ne retournez pas au magasin. Pour obtenir de l’aide, commu-

niquez avec le service à la clientèle.

Summary of content (12 pages)

PAGE 1
PULL-DOWN KITCHEN FAUCET LLAVE DE AGUA/GRIFO EXTRAÍBLE PARA COCINAS ROBINET À BEC RÉTRACTABLE POUR ÉVIER DE CUISINE 91810 LITZE™ Models/Modelos/Modèles Accessory Order Only Solo para ordenar accesorios Accessoire livrable séparément 63043LFp 63044LFp 63053LFp 63054LFp RP79275p Soap/Lotion Dispenser Dispensador de jabón/loción Distributeur de savon ou de lotion 63063LFp RP71451p Escutcheon Chapa Plaque de finition 63064LFp Write purchased model number here.
PAGE 2
You may need: Usted puede necesitar: Articles dont vous pouvez avoir besoin: 1 1 2 2 1 OPTIONAL ESCUTCHEON INSTALLATION / INSTALACIÓN OPCIONAL DE UNA CHAPA / INSTALLATION DE LA PLAQUE DE FINITION FACULTATIVE THIN DECK INSTALLATION/ INSTALACIÓN EN ENCIMERA DE GROSOR DELGADO / INSTALLATION DE LA PLAQUE DE RENFORT 2 1 2 3 1 3 1 4 4 Place escutcheon (not included) and gasket under faucet base. From underneath, install nuts and washers onto studs. Use deck aid (not included) for thin gauged sinks.
PAGE 3
2 3 2 1 2 1 1 2 2 1 2 SEALANT SELLADORES PRODUITS D’ÉTANCHÉITÉ OVERTIGHTEN APRIETES DEMASIADO TROP SERRER 1 NOTE: If you determine the PEX supply tubing for this faucet is too long and must be shorter to create an acceptable installation, follow the instruction for Custom Fit Connections. NOTE: If you determine the PEX supply tubing for this faucet is too long and must be shorter to create an acceptable installation, follow the instruction for Custom Fit Connections.
PAGE 4
7 6 Side View Vista lateral Vue latérale 1 2 Backflow Protection System 8 Your Brizo® faucet pull-down spout incorporates a backflow protection system that has been tested to be in compliance with ASME A112.18.3 and ASME A112.18.1 / CSA B125.1. It incorporates two certified check valves in series, which operate independently and are integral, non-serviceable parts of the wand assembly. Should your local plumbing codes require an atmospheric type vacuum breaker one must be purchased separately.
PAGE 5
CUSTOM FIT CONNECTIONS / CONEXIONES ESPECIALES / SPÉCIAUX TUYAUTERIE BRANCHEMENT Installer accepts the responsibility to cut supply tubing in a way that allows a leak-free joint to be created. Brizo is not responsible for tubing that is cut too short or cut in a way that will not allow for a leak-free joint. Must use RP50952 sleeves supplied with model and nuts included on supply lines. Tube cut must be straight. See plastic sleeve installation found in RP50952 and included below for more information.
PAGE 6
4 3 1 6 9 8 7 2 5 4 Maintenance If faucet exhibits very low flow – Unscrew aerator (1) with aerator wrench (2) from sprayer wand and clean debris from sprayer outlet and aerator screen. If faucet leaks from under handle or from spout outlet – TURN OFF WATER SUPPLIES. Insert a small screwdriver into slot (3) in button (4) and remove. Loosen screw (5) inside of handle. Remove handle (6). Remove bonnet (7) by rotating counterclockwise. Bonnet may be stiff due to O-ring, but should rotate by hand.
PAGE 7
LITZE™ Models/Modelos/Modèles 63043LF▲, 63044LF▲, 63053LF▲, 63054LF▲, 63063LF▲ & 63064LF▲ RP91791p Angle Kitchen Spout Assembly Ensamble angular para surtidores de cocinas Robinet à profil angulaire pour évier de cuisine RP91790p RP91789p Arc Kitchen Spout Assembly Ensamble arqueado para surtidores de cocinas Robinet col de cygne pour évier de cuisine Square Kitchen Spout Assembly Ensamble cuadrado para surtidores de cocinas Robinet à profil carré pour évier de cuisine RP91786 Wand Retainer Aro reten
PAGE 8
Accessory Order Only / Solo para ordenar accesorios / Accessoire livrable séparément Soap Dispenser Installation 1 6 RP80916p Body Assembly Ensamble del Cuerpo Corps RP79275p Dispenser Assembly (Accessory order only) Ensamble del Dispensador (Orden de accesorio solamente) RP83779 Pump Bomba Pompe Distributeur (livrable séparément seulement) Recommended spacing between holes for faucet and soap dispenser is 4" (101.6 mm) minimum. • Separate head (1) from body assembly (2).
PAGE 9
Limited Warranty on Brizo® Faucets Parts and Finish All parts (other than electronic parts and batteries) and finishes of this Brizo® faucet are warranted to the original consumer purchaser to be free from defects in material and workmanship for as long as the original consumer purchaser owns the home in which the faucet was first installed or, for commercial users, for 5 years from the date of purchase.
PAGE 10
Notes / Notas / Notes 10 91810 Rev.
PAGE 11
Notes / Notas / Notes 91810 Rev.
PAGE 12
Notes / Notas / Notes 12 91810 Rev.