Installation Guide

ManualsBrandsBrizo ManualsKitchen FaucetsBrizo Solna Pull-Down Articulating Kitchen Faucet with Magnetic Docking Spray Head - Limited Lifetime Warranty

ARTICULATING KITCHEN FAUCET

LLAVE DE AGUA-GRIFO CON BRAZO

ARTICULADO PARA COCINAS

ROBINET DE CUISINE À BRAS

ARTICULÉ

Models/Modelos/Modèles

63221LFs

Series/Series/Seria

SOLNA

Write purchased model number here.

Escriba aquí el número del modelo comprado.

Inscrivez le numéro de modèle ici.

2/10/15 Rev. A

You may need/Usted puede necesitar/Articles dont vous pouvez avoir besoin:

Para instalación fácil de su llave

Brizo

usted necesitará:

• LEER TODAS las instrucciones completamente

antes de empezar.

• LEER TODOS los avisos, cuidados, e

información de mantenimiento.

For easy installation of your

Brizo

faucet you will need:

• To READ ALL the instructions completely

before beginning.

• To READ ALL warnings, care, and maintenance

information.

Pour installer votre robinet

Brizo

facilement, vous devez:

• LIRE TOUTES les instructions avant de débuter;

• LIRE TOUS les avertissements ainsi que toutes

les instructions de nettoyage et d’entretien;

80913

www.brizo.com

sSpecify Finish / Especifíque el Acabado / Précisez le Fini

With Optional Escutcheon RP71451s

Con la opción de Chapetón RP71451s

Avec plaque de finition en option RP71451s

Summary of content (12 pages)

PAGE 1
ARTICULATING KITCHEN FAUCET LLAVE DE AGUA-GRIFO CON BRAZO ARTICULADO PARA COCINAS ROBINET DE CUISINE À BRAS ARTICULÉ 80913 Models/Modelos/Modèles 63221LFs Series/Series/Seria SOLNA® Write purchased model number here. Escriba aquí el número del modelo comprado. Inscrivez le numéro de modèle ici.
PAGE 2
B. A. 1 2 3 2 2 1 1 2 2 Mount Faucet to Deck A. Your faucet is designed for a hole diameter of 1 3/8" +/- 1/8" (35 mm +/- 3 mm) and a deck thickness of up to 3" (76.2 mm). Note: With 10" escutcheon, maximum deck thickness is reduced to 2 3/4" (69.9 mm). SHUT OFF WATER SUPPLIES. Remove adhesive backing on base gasket (1) and press into place on faucet base (2). Insert faucet tubes and shank through mounting hole in sink. B. Secure faucet to sink with washer and mounting nut (1).
PAGE 3
1 Optional / Opcional / Facultatif A. B. C. 1 1 3 2 1 2 4 5 1 3 1 Optional Escutcheon Installation For optional installations using the 10" escutcheon (1), order RP71451 not supplied (specify finish). A. SHUT OFF WATER SUPPLIES. Slide escutcheon (1) and gasket (2) over tubes and place on bottom of faucet. Insert tubes through mounting hole in sink and center faucet in position over holes.
PAGE 4
2 A. B. 2 OR O 2 1 2 OU 3 1 4 A. Water Line Connections Ensure all fittings and end connections are free of debris. Faucet fittings (1) are 3/8" compression, with ends colored red for hot and blue for cold. Loop tubing (2) if it is too long. Note: Recommended tubing minimum bend diameter is 8". Secure metal nut (3) on faucet tube to supply valve connection (4) and hand tighten, then tighten one additional turn with wrench. DO NOT OVERTIGHTEN. Repeat for other tube.
PAGE 5
Incorrect Installation Instalación Incorrecta Installation Incorrecte Correct method Método Correcto Bonne méthode 2 3 1 4 Custom Fit Connections - Plastic Sleeve Installation Instructions 1. Identify desired length of tube (1). Leave 1" - 2" of extra length to allow for easier installation and cut tube. Ensure cut is straight and burr free. 2. Slide nut (2) and plastic sleeve (3) onto cut tube. Ensure sleeve is oriented as shown. 3. Insert tube into outlet fitting (4).
PAGE 6
4 3 2 1 1 2 2 3 1 1 2 3 Note: Clip fits behind shoulders on outlet and hose fittings. Nota: Ajustes del clip detrás de hombros en las guarniciones del enchufe y de manguera. Note : Ajustements d’agrafe derrière des épaules sur des embouts de sortie et de durites. 3 2 3 1 Flush Supply Lines Place a bucket below the outlet fitting and move the valve handle (1) to the open mixed position.Then, while holding the outlet tube (2) over the bucket, slowly open and close the supply stops (3).
PAGE 7
5 A. B. Optional Opcional Facultatif 1 6 5 2 2 3 4 4 3 5 1 Soap Dispenser Installation (Accessory Order Only - RP79275 Specify Finish) Notice Property damage and water leak possible. Leaks and property damage may occur from incorrect installation. Follow all installation instructions before making final connections and turning on the supplies. A. Turn on hot and cold water supplies (1). Move faucet handle (2) to the mixed position. Check all connections at arrows for leaks.
PAGE 8
RP80637▲ Hose & Sprayer Assembly Juego de Manguera y Rociador Tuyau souple et douchette NOTE: Exterior arm screws are decorative and will NOT need to be tightened during the lifetime of the faucet. Turning or removing screws may hinder arm functionality and will void the faucet warranty. NOTA: Los tornillos en los brazos exteriores son decorativos y NO requerirán ser apretados durante el tiempo de vida de la llave de agua/grifo.
PAGE 9
Backflow Protection System RP80916s Body Assembly Ensamble del Cuerpo Corps Your Brizo® faucet pull-down spout incorporates a backflow protection system that has been tested to be in compliance with ASME A112.18.3 and ASME A112.18.1 / CSA B125.1. It incorporates two certified check valves in series, which operate independently and are integral, nonserviceable parts of the wand assembly. Should your local plumbing codes require an atmospheric type vacuum breaker one must be purchased separately.
PAGE 10
1 1 4 2 6 1 10 9 8 5 4 3 6 7 Maintenance If faucet exhibits very low flow – TURN OFF WATER SUPPLIES. Unscrew adapter (1) & knurled knob (4) from spray head and clean debris from sprayer inlet (2). To remove spray head from hose, turn adapter (1) counterclockwise. Then, press button (3) and turn knurled knob (4) counterclockwise. may be stiff due to O-ring, but should rotate by hand. Remove bonnet nut (9) by rotating counterclockwise with a wrench.
PAGE 11
3 5 1 4 2 5 2 6 1 4 3 Hose and Sprayer Removal Hose and Sprayer Installation TURN OFF WATER SUPPLIES. Place bucket below outlet fitting under sink. Remove clip (1) from outlet (2) and disconnect hose (3). A small amount of water may drip from outlet or hose. Unscrew decorative nut (4) counterclockwise by hand from faucet hub. Slide hose (1) through top of faucet hub (2). Screw decorative nut (3) clockwise into top of faucet hub. NOTE: Hand-loosen only.
PAGE 12
Limited Warranty on Brizo® Faucets Parts and Finish All parts (other than electronic parts and batteries) and finishes of this Brizo® faucet are warranted to the original consumer purchaser to be free from defects in material and workmanship for as long as the original consumer purchaser owns the home in which the faucet was first installed or, for commercial users, for 5 years from the date of purchase.