Installation Guide

ManualsBrandsBrizo ManualsKitchen FaucetsBrizo Solna Pull-Down Bar Faucet with Hidden Magnetic Docking Spray Head - Includes Lifetime Warranty

HIGH-RISE PULL-DOWN KITCHEN

AND BAR / PREP FAUCETS

LLAVES DE AGUA ELEVADAS,

DESLIZABLES HACIA ABAJO,

PARA COCINAS Y BARES / PREP

ROBINET À COL DE CYGNE ET

BEC-DOUCHETTE POUR ÉVIER

DE BAR OU D’ÎLOT DE CUISINE

Models/Modelos/Modèles

63020LF & 63920LF

Series/Series/Seria

Write purchased model number here.

Escriba aquí el número del modelo comprado.

Inscrivez le numéro de modèle ici.

02/19/14 Rev. G

ASME A112.18.1 / CSA B125.1

ICC/ANSI A117.1

You may need/Usted puede necesitar/Articles dont vous pouvez avoir besoin:

SOLNA

71449

Para instalación fácil de su llave

Brizo

usted necesitará:

•LEER TODAS las instrucciones completamente

antes de empezar.

•LEER TODOS los avisos, cuidados, e

información de mantenimiento.

For easy installation of your

Brizo

faucet you will need:

•ToREAD ALL the instructions completely

before beginning.

• To READ ALL warnings, care, and

maintenance information.

Pour installer votre robinet

Brizo

facilement, vous devez:

•LIRE TOUTES les instructions avant de débuter;

•LIRE TOUS les avertissements ainsi que toutes

les instructions de nettoyage et d’entretien;

www.brizo.com

Summary of content (12 pages)

PAGE 1
HIGH-RISE PULL-DOWN KITCHEN AND BAR / PREP FAUCETS LLAVES DE AGUA ELEVADAS, DESLIZABLES HACIA ABAJO, PARA COCINAS Y BARES / PREP ROBINET À COL DE CYGNE ET BEC-DOUCHETTE POUR ÉVIER DE BAR OU D’ÎLOT DE CUISINE 71449 ASME A112.18.1 / CSA B125.1 ICC/ANSI A117.1 Models/Modelos/Modèles 63020LF & 63920LF Series/Series/Seria SOLNA® Write purchased model number here. Escriba aquí el número del modelo comprado. Inscrivez le numéro de modèle ici.
PAGE 2
CLEANING AND CARE Care should be given to the cleaning of this product. Although its finish is extremely durable, it can be damaged by harsh abrasives or polish. To clean, simply wipe gently with a damp cloth and blot dry with a soft towel.
PAGE 3
▲ Specify Finish Especifíque el Acabado Précisez le Fini RP71446▲ Bar Spout Assembly with Magnet Ensamble del Tubo de Salida Bec RP71447▲ Kitchen Spout Assembly with Magnet Ensamble del Tubo de Salida Bec RP64560 Sprayer Assembly (Black Only) Ensamble de rociador Pulvérisateur RP60923 Friction Spacer Arandela de Fricción Rondelle de frottement RP60114 Cartridge Assembly Ensamble de la válvula Soupape RP71453▲ Cap Casquete Embase RP71451▲ Optional 10 1/2" Escutcheon, Mounting Screws (2), gasket, Nuts (2
PAGE 4
Backflow Protection System Other useful accessories that may be purchased separately. Otros accesorios útiles que se pueden comprar por separado. Autres accessoires utiles pouvant être achetés séparément. Your Brizo® faucet pull-down spout incorporates a backflow protection system that has been tested to be in compliance with ASME A112.18.3 and ASME A112.18.1 / CSA B125.1.
PAGE 5
1 B. A. 2 3 2 2 1 1 2 2 Mount Faucet to Deck A. Your faucet is designed for a hole diameter of 1 3/8" +/- 1/4" (35 mm +/- 6 mm) and a deck thickness of up to 3" (76 mm). Install gasket (1) into groove under faucet base (2). Insert faucet tubes and shank through mounting hole in sink; and, place faucet over mounting hole. Note: With 10 1/2" escutcheon, maximum deck thickness is reduced to 2 3/4" (69.8 mm). Instale la Llave de Agua en el Borde A.
PAGE 6
OPTIONAL / OPCIONAL / FACULTATIVE 2 1 4 2 1 5 3 3 4 2 2 3 4 2 4 5 5 5 4 6 2 6 Incorrect Installations. Optional Escutcheon Installation Hose Installation For optional installations using the 10 1/2" escutcheon, order RP71451 (specify finish) not supplied. Place the 10 1/2" escutcheon (1) and gasket (2) under faucet base. Mount as shown above using the 2 1/4-20 studs (3), nuts and washers (4), mounting nut and washer (5). Tighten mounting nut (5) securely by hand.
PAGE 7
3 A. B. 2 OR 2 1 O 2 OU 3 1 4 3 1 2 4 Water Line Connections A. Ensure all fittings and end connections are free of debris. Faucet fittings (1) are 3/8" compression, with ends colored red for hot and blue for cold. Loop tubing (2) if it is too long. Note: Recommended tubing minimum bend diameter is 8". Secure metal nut (3) on faucet tube to supply valve connection (4) and hand tighten, then tighten one additional turn with wrench. DO NOT OVERTIGHTEN. Repeat for other tube.
PAGE 8
Correct method Método Correcto Bonne méthode Incorrect Installation Instalación Incorrecta Installation Incorrecte 2 3 1 4 Custom Fit Connections - Plastic Sleeve Installation Instructions 1. Identify desired length of tube (1). Leave 1" - 2" of extra length to allow for easier installation and cut tube. Ensure cut is straight and burr free. 2. Slide nut (2) and plastic sleeve (3) onto cut tube. Ensure sleeve is oriented as shown. 3. Insert tube into outlet fitting (4).
PAGE 9
4 B. A. 2 C. 3 OR 3 6 4 5 1 1 A. Turn on hot and cold water supplies (1). Pull the hose assembly (2) out of the spout. Be sure to hold the end of the hose down into the sink and turn faucet handle (3) to the mixed position. Note: To turn faucet on, move handle (3) away from body (4). Flush water lines for one minute. IMPORTANT: This flushes away any debris that could cause damage to internal parts. Install the sprayer (5) and discard blue clip (6). C.
PAGE 10
3 6 2 5 4 3 1 2 Maintenance If faucet leaks from under handle or from spout outlet – Insert a small screwdriver into slot (1) in button (2) and remove. Loosen set screw (3) inside of handle. Remove handle. Remove bonnet (4) by rotating counterclockwise. Bonnet may be stiff due to O-ring, but should rotate by hand. Remove bonnet nut (5) by rotating counterclockwise with a wrench. Remove cartridge (6) by pulling directly back on stem. Replace cartridge and reassemble.
PAGE 11
Notes / Notas / Notes 11 71449 Rev.
PAGE 12
Notes / Notas / Notes www.brizo.com 12 71449 Rev.