Specification Sheet

81892-p
Submitted Model No.: _______________________________________
Specific Features: __________________________________________
BSP-B-81892 Rev. A
COMPLIES WITH:
• ASME A112.18.1 / CSA B125.1
Brizo Kitchen & Bath Company reserves the right (1) to make changes in specifications and materials, and (2) to
change or discontinue models, both without notice or obligation. Dimensions are for reference only. See current
full-line price book or www.brizo.com for finish options and product availability.
LINEAR SLIDE BAR
SHOWER ARM
AND FLANGE
STANDARD SPECIFICATIONS:
• Provides 10" of height adjustability up and down arm
• Recommended for use with showerheads less than 10" in
diameter and weighing no more than 2.5 pounds
• Finished semi-flexible metal hose
• 1/2" NPT threads
Brizo Kitchen & Bath Company
55 E. 111th Street, Indianapolis, Indiana 46280
350 South Edgeware Road, St. Thomas, ON N5P 4L1
© 2020 Brizo Kitchen & Bath Company
WARRANTY
• Parts and Finish - Lifetime limited warranty; or for
commercial purchasers, 10 years for multi-family
residential (apartments and condominiums) and
5 years for all other commercial uses, in each case
from the date of purchase.
• Electronic Parts and Batteries (if applicable) - 5
years from the date of purchase; or for commercial
purchasers, 1 year from the date of purchase. No
warranty is provided on batteries.
▲ Designate finish suffix
24 1/8"
(616 mm)
7 7/8"
(200 mm)
6 1/8"
(155 mm)
10 7/16"
(265 mm)
1 3/16"
(30 mm)
Dia.
2 9/16"
(64 mm)
Dia.
6"
(152 mm)
Select a height for the shower arm based on your
personal needs. NOTE: Shower arm must be
installed minimum 20” from the ceiling to prevent
hose contact with the ceiling. The recommended
distance from the floor is 6” lower than a typical arm
to better access the adjustable arm.
7’
6’
5’
4’
3’
20” (508 mm)
Min.
Ceiling
Techo
Plafond
Floor
Piso
Plancher
Measurement should
be 6” (152 mm)
lower than typical
shower arm