Owner manual

Description:
DIGITAL DISPLAY
Convenient display offers visual
confirmation and remembers highest CO
levels detected.
ELECTROCHEMICAL
CO SENSOR
Most accurate technology available for
detecting carbon monoxide as compared to
other sensing technologies.
LATCHING ALARM
INDICATOR
Remembers which unit initiated an alarm.
INTELLEGENT SENSING
TECHNOLOGY
Microprocessor controlled to reduce
the number nuisance alarms.
END OF LIFE SIGNAL
Provides audible and visual notice when
alarm needs to be replaced.
TWO LOCKING
FEATURES
Pins lock battery drawer and/or alarm to
base. Perfect for apartment, dormitory or
hotel applications.
CAT.
CO5120PDBN
120V AC, 60Hz Wire-in
with 9V Battery Backup
The BRK Brands, Inc. Cat. No CO5120PDBN is a wire-in, 120 VAC 60Hz single
and / or multiple station carbon monoxide alarm specifically designed for
residential and institutional applications including sleeping rooms of hospitals,
hotels, motels, dormitories and other multi-family dwellings as defined in
standard NFPA 101. Model CO5120PDBN complies with UL2034, NFPA 720, HUD,
FHA and other agencies that model their codes after the above agencies. They
meet building codes where AC/DC carbon monoxide alarms are required either
separately or in combination. The alarms are interconnectable up to 18 devices,
of which 12 can be smoke alarms.
The BRK CO5120PDBN features an electrochemical carbon monoxide sensor, a
multi-function LCD digital display, an 85dB horn, 9V battery back-up, an End of
Life and a silence feature. “Intelligent Sensing Technology” is designed to reduce
nuisance alarms. The peak level function allows for easy viewing of highest CO
levels detected. “Latching Alarm Indicator” remembers which unit initiated an
alarm. When interconnected in a series, the unit that triggered the alarm will
store in memory or “latch” the information and begin to flash the LED indicator 2
seconds on, 2 seconds off. A single button test/silence button eliminates
confusion. Battery installation and removal can occur while the unit is mounted
to the ceiling or wall via the side load battery compartment. Other Contractor
Preferred features include a dust cover to keep alarm clean during construction,
keyhole slots in the mounting bracket eliminate the need to remove the electrical
box screws for installation. Two locking features are provided to prevent battery
theft and/or theft of the unit. Connection to
AC power is made with
a“Quick-Connect” wiring
harness.
Installation is quick,
easy and cost
effective.
CARBON
MONOXIDE
ALARM
CO
7