Operation Manual

Page 5
PRODUCT OVERVIEW
Camera and Power Connections
Follow this diagram to make device connections. Note, some devices are not
included with this kit. See “What’s in the Box” for included devices.
Connecting Devices
Installing Cameras
Installing Cable-Safe Mounting Bracket
Decide if the camera is to be wall or ceiling mounted and if cable will be fed through
mounting surface hidden directly behind the bracket or fed through the side of the
bracket so cable is exposed. Mark area where you will drill your hole. The Cable-Safe
Mounting Bracket has three Adjusting Points. 1) Rotates Bracket 360° relative to
mounting surface, 2) Adjusts bracket hinge 180° and 3) Rotates camera body 360° to
level image.
Step 1: Select the position for the camera and drill your hole for the cable. Feed
cable through mounting surface. Mount bracket to surface.
Step 2: Aim camera at target and using Adjusting Points 1 and 2 in tandem position
camera. Tighten Ring and Thumb Screw.
Step 3: Rotate camera body using Adjusting Point 3 to the proper view angle making
sure the Camera Shield is always on top and parallel to the ground so the image is
level in the Live View Screen. See “Camera Orientation” Info box. Tighten screw.
Step 4: Attach proper length of cable and run from camera to DVR location. Note:
Power cable ends are different. Be sure the correct power connector end matches
“To Camera” or “To DVR”. Tip - Connect cable at camera end before running cable to
verify orientation is correct. Also, see Information box on “Longer Cable Runs”.
Step 5: Check camera orientation via the Live View screen.
Adjust as required.
RS-485 Device
VGA Cable
HDMI Cable
IR Dome Camera
USB Mouse
Ethernet to
Internet
BNC Cable with
Video & Power
Additional Cameras can be Connected from
Power Splitter with BNC Cables
Tablet & Smartphone App
Use First Alert
Power Supply
Only
Power
Splitter
Power
Splitter
Use First Alert Cameras Only
RCA Audio Out to
Powered Speakers
(Not included)
RCA Audio In from Audio
Cameras or Powered
Microphone (Not included)
PTZ & Alarm Connections
(Cameras not included)
Only the HDTVI camera and BNC cable is included.
NOTE
: