Operation Manual

Page 20
Network Menu
Path: System Setup>Network
Using the Network menu, settings for the DVR’s
connection to a network and the internet can be
changed and adjusted.
• PPPoE
Click Set to setup the DVR to comminucate over
DSL or 3G wireless networks. You will need the
account information from your Service Provider
• IP
The DVR’s IP address can
be manually set here
• NetMask
The IP Subnet Mask can
be manually set here
• Gateway
Set the Gateway IP
address here
• DNS
Select the DNS IP address
for the network here
• Device Port
Used to select an open
port on a network router
for the DVR to access
• Automatic (DHCP)
Click here to automatically
assign an IP address to
the DVR once connected
to a network
• MAC
This is the MAC address
for the DVR
• Device ID
This is the SmartBridge
Device ID for the DVR
• Status
Network status of the
DVR
SYSTEM SETUP
NETWORK MENU