Operation Manual

Page 42
Press this button to connect all cameras connected to the Auto ID system. Also, Right click on a camera source screen
and select connect.
Press this button to disconnect all cameras connected to the Auto ID system. Also, Right click on a camera source
screen and select disconnect.
Press this button to Record to an external hard drive (80gb or larger required)
Press this button to take a snapshot image of a selected camera window. Image is automatically saved to the external
hard drive. (80gb or larger required)
Press this button to play video recorded to the external drive after the record external button has been pressed.
Press this button to select the advanced settings features.
Press this button to open the settings window.
Press this button to isolate all connected cameras to POP Up windows which can be easily moved around on the desk-
top.
Press this button to minimize the Smartbridge software and to return to your desktop.
Press this button to Exit the software.
This displays the channels that are connected. When a channel is connected, it will show a green bar on the left of the
channel number. The green bar will be off when the channel is disconnected. A green bar will be below when a channel
is selected.
Press to see recorded les on DVR system (See start/stop master recordings)
Press to search for recordings on a specic day on the DVR system.
REMOTE ACCESS
NETWORK SETUP