Operation Manual

Page 14
Proper Startup
Proper startup and shutdown procedures are crucial to expanding the life of the DVR. Check that the voltage of
the extra power supply is the same with the DVR’s requirement, and the ground connection is working properly.
INITIAL SETUP
Starting Up
1. Check the power supply is plugged into an electrical outlet. It is HIGHLY
recommended that an Uninterrupted Power Supply (UPS) be used in
conjunction with the device.
2. Turn on the power switch on the rear panel, and the Power indicator LED
should turn on indicating that the unit begins to start up.
3. After startup, the Power indicator LED remains on
Shutting Down
1. Menu > Shutdown
2. Shutdown
3. Yes
4. Turn off the power switch on the rear panel
when the note appears.
Start Up and Shut Down