Operation Manual

Page 21

Operations

Using the Mouse

LIVE VIEW

Operations in Live View?

Live View offers the following functions:

Function DeScription

Single Screen Displays only one screen on the monitor

Multi-Screen Simultaneously displays multiple screens on the monitor

Auto-Switch

Use to auto switch between screens

Dwell time for each screen must be set in the Conﬁguration menu before enabling

(Menu > Conﬁguration > Live View > Dwell Time)

Start Recording Continuously record (motion detection record supported)

Quick Settings Set output to Standard, Bright, Gentle, or Vivid

Playback Play back the recorded videos for current day.

name DeScription

Menu Enter the main menu of the system by right clicking the mouse.

Single Screen Switch to the single full screen by choosing channel number from the dropdown list.

Multi Screen Adjust the screen layout by choosing from the dropdown list.

Previous Screen Switch to the previous screen.

Next Screen Switch to the next screen.

Start/Stop

Auto-switch

Enable/disable the auto-switch of the screens.

The dwell time of the live view conﬁguration must be set before using Start Auto-switch.

Start Recording

Start recording of all channels, Normal Record and Motion Detection Recording are selectable from the drop-

down list.

Add IP Camera A shortcut to enter the IP camera management interface.

Quick Settings Output Mode is conﬁgurable with Standard, Bright, Gentle and Vivid options.

Playback Enter the playback interface and start playing back the video of the selected channel immediately.

PTZ Control A shortcut to enter the PTZ control interface of the selected camera