Operation Manual

Page 25

PTZ CONTROLS

Calling Presets in PTZ Setting Interface

Enable a position for a PTZ camera to point to when an

event takes place.

1. Click the button PTZ in the lower-right

corner of the PTZ setting interface;

Or press the PTZ button on the front panel

or click the PTZ Control icon

in the quick

setting bar, or select the PTZ option in the right-

click menu to show the PTZ control panel.

2. Choose Camera in the dropdown list.

3. Click the

button to show the general

settings of the PTZ control.

4. Click to enter the preset No. in the

corresponding text ﬁeld.

5. Click the Call Preset button to call it.

Customizing Patrols

Patrols allow a PTZ camera to move to different points for

set durations before moving to the next point. Key points

correspond to presets: Menu > Camera > PTZ

1. Select patrol number from dropdown.

2. Click the Set button to add key point.

3. Conﬁgure key point parameters. The Key Point No.

determines order.

4. Click the Add button to add the next key point to the pa-

trol, or you can click the OK button to save the key point to

the patrol.

Choose corresponding preset number.

Choose time duration to stay at key point.

Choose speed at which PTZ camera will move to next key point.