Operation Manual

Page 26

PTZ CONTROLS

Calling Patrols in PTZ Setting Interface

Calling a patrol makes the PTZ to move

according the predeﬁned patrol path.

1. Click the button PTZ in the lower-right corner of the PTZ

setting interface;

2. Click the

button to show the general settings of the

PTZ control.

3. Select a patrol in the dropdown list and click the Call

Patrol button to call it.

4. You can click the Stop Patrol button to stop calling it.

Customizing Patterns

Set patterns by recording the movement of the PTZ camera and call the pattern to make the PTZ camera movement according

to the predeﬁned path: Menu > Camera > PTZ

Calling Patterns in PTZ Setting

Interface

Move PTZ camera according to predeﬁned patterns in

PTZ setting interface:

1. Click the button PTZ in the lower-right corner of the

PTZ setting interface;

2. Click the

button to show the general settings of

the PTZ control.

3. Click the Call Pattern button to call it.

4. Click the Stop Pattern button to stop calling it.

1. Choose pattern number.

2. Click the Start button and click corresponding

buttons in the control panel to move the PTZ

camera, and click the Stop button to stop it.

The movement of the PTZ is recorded as the

pattern.