Operation Manual

Page 27

PTZ CONTROLS

Customizing Linear Scan Limit

The Linear Scan can be enabled to trigger the scan in the horizontal direction in the predeﬁned range.

This function is supported by some certain models.

Calling Linear Scan

Follow the procedure to call the linear scan in the

predeﬁned scan range.

1. Click the button PTZ in the lower-right corner of the

PTZ setting interface;

2. Click the

button to show the one-touch function

of the PTZ control.

3. Click Linear Scan button to start the linear scan and

click the Linear Scan button again to stop it.

You can click the Restore button to clear the deﬁned

left limit and right limit data and the dome needs to

reboot to make settings take effect.

One-touch Park

For some certain model of the speed dome, it can be conﬁgured to start a predeﬁned park action (scan, preset, patrol

and etc.) automatically after a period of inactivity (park time).

1. Click the button PTZ in the lower-right corner of the PTZ setting interface;

2. Click the

button to show the one-touch function of the PTZ control.

3. There are 3 one-touch park types selectable, click the corresponding button to activate the park action.

Park (Quick Patrol): The dome starts patrol from the predeﬁned preset 1 to preset 32 in order after the park time. The

undeﬁned preset will be skipped.

Park (Patrol 1): The dome starts move according to the predeﬁned patrol 1 path after the park time.

Park (Preset 1): The dome moves to the predeﬁned preset 1 location after the park time.

The park time can only be set through the speed dome conﬁguration interface, by default the value is 5s.

4. Click the button again to inactivate it.

1. Enter the PTZ Control interface.

Menu > Camera > PTZ

2. Use directional button to wheel the camera to the

location where you want to set the limit.

Click Left Limit or Right Limit to link location to

corresponding limit.

The speed dome starts linear scan from the left

limit to the right limit, and you must set the left

limit on the left side of the right limit, as well the

angle from the left limit to the right limit should be

no more than 180º.

NOTE