Operation Manual

Page 31
RECORDING SETTINGS
Drawing a Schedule
1. Click on the color to select a record type in the event list.
2. Click Apply. (To apply to other channels, click Copy and select channels).
The motion detection setting can automatically trigger recording, full screen monitoring, audio warning,
notification to surveillance center, and more when enabled. To enable: Menu > Camera > Motion.
1. Choose the Camera.
2. Check Enable Motion Detection.
3. Drag and draw a box on area for motion detection
using left mouse button or choose “Full Screen” to
enable motion detection for the entire viewing area.
Click Clear to remove a motion detection area.
4. Click Settings for the Channel Information pop up.
5. Select the channels which you want the motion
detection event to trigger recording.
6. Click Apply
7. Click OK to return to the previous menu and exit the
motion detection menu.
Configuring Motion Detection Record
Normal recording
Recording triggered by motion
Recording triggered by alarm
Recording triggered by either motion or alarm
Recording triggered by both motion and alarm
Delete set schedule