Operation Manual

Page 33

RECORDING SETTINGS

Manual Record

Follow the steps to set parameters for the manual record. Using manual record, you don’t need to set a schedule for

recording. Enter the Manual Settings interface: Menu > Manual

1. Click Record.

2. Click status button to change

to .

Or click the status icon of Analog to

enable manual record of all channels.

3. Disable manual record.

Click the status icon to change it to .

Or click the status icon of Analog to

disable manual record of all channels.

NOTE

After rebooting all the manual records

enabled are canceled.

NOTE

Up to 8 periods can be conﬁgured for each

day. And the time periods cannot be overlapped each

other. In the time table of the channel, both holiday

schedule and normal day schedule are displayed.

Repeat the above step 4 to set Holiday schedule for

other channel. If the holiday schedule can also be

used to other channels, click Copy and choose the

channel you want to apply the settings.

Conﬁguring Holiday Record

To conﬁgure recording and capture settings for

holidays, enter the Record Setting interface:

Menu > Record > Holiday. Click on the holiday

and then press the button.

1. Check Enable Holiday.

2. Select Mode from dropdown list.

3. Set Start Date and End Date.

4. Click Apply.

5. Click OK.

6. Conﬁgure the record schedule.

Refer to Conﬁguring Record Schedule, while you may

choose Holiday in the Schedule dropdown list, or you can

draw the schedule on the timeline of Holiday below.