Operation Manual

Page 37
RECORDING SETTINGS
Protect File by Setting HDD Property to Read-Only
Enter the HDD Setting interface: Menu > HDD.
1. Click
to edit the preferred HDD.
NOTE
:
To edit HDD property, set the storage mode of the
HDD to Group.
2. Set HDD Property to Read-only.
3. Click OK.
NOTE
:
Files can only be saved when HDD Property is set
to R/W.
NOTE
:
If there is only one HDD and is set to Read-only,
the DVR cannot record any files. Only live view
mode is available.
NOTE
:
If you set the HDD to Read-only when the DVR
is saving files in it, then the file will be saved
in next R/W HDD. If there is only one HDD, the
recording will be stopped.
Before you start
To edit HDD property, you need to set the storage mode of
the HDD to Group.