Operation Manual

Page 52

Setting Motion Detection

Enter the Motion Detection interface of Camera Management and choose a camera you want to set up motion detection:

Menu > Camera > Motion.

1. Set detection area and sensitivity.

Check Enable motion detection, use the mouse to

draw detection area(s) and drag the sensitivity bar

to set sensitivity.

Click

to set alarm response actions.

2. Click Trigger Channel tab and select one or more channels

which will start to record or become full-screen monitoring when

motion alarm is triggered.

3. Set arming schedule of the channel.

Select Arming Schedule tab to set the channel’s arming

schedule.

Choose one day of a week and up to eight time periods

can be set within each day. Or click Copy to copy time

period settings to other day(s).

Time periods shall not be repeated or

overlapped.

4. Click Linkage Action tab to set up alarm response

actions of motion alarm (refer to Setting Alarm Response

Actions).

Repeat the above steps to set up arming schedule of

other days of a week.

Click OK to complete the motion detection settings of the

channel.

5. If you want to set motion detection for another

channel, repeat the above steps or just copy the above

settings to it.

You are not allowed to copy the “Trigger

Channel” action.

ALARM SETTINGS

NOTE