Operation Manual

Page 53
2. Select Arming Schedule.
3. Choose one day of a week and up to eight time
periods can be set within each day.
Or you can click the Copy button to copy the time
period settings to other day(s).
Time periods shall not be repeated or
overlapped.
Repeat the above steps to set arming schedule of
other days of a week. You can also use Copy button
to copy an arming schedule to other days.
4. Select Linkage Action tab to set up alarm
response action of video loss (refer to Setting Alarm
Response Actions).
5. Click the OK button to complete the video loss
settings of the channel.
Repeat the above steps to finish settings of other
channels, or click the Copy button copy the above
settings to them.
ALARM SETTINGS
NOTE
:
Detecting Video Loss
Detect video loss of a channel and take alarm
response action(s).
Enter the Video Loss interface of Camera
Management: Menu > Camera > Video Loss and
select the channel to detect.
1. Check Enable Video Loss Alarm and click
to
set up handling of video loss.