Operation Manual

Page 55

ALARM SETTINGS

Setting All-day Video Quality Diagnostics

The device provides two ways to diagnose the video

quality: manual and all-day. Perform the following

steps to set the threshold of the diagnosing and the

linkage actions.

1. Enter Video Quality Diagnostics settings

interface of Camera Management and select a

channel you want to detect video tampering.

Menu> Camera> Video Quality Diagnostics

2. Check the checkbox of Enable Video Quality

Diagnostics.

3. Enable and set the threshold of the diagnostic

types, there are Blurred Image, Abnormal

Brightness, and Color Cast.

Check the corresponding checkbox of the

diagnostic type, and adjust the threshold of it by

clicking-and-dragging the bar.

The higher the threshold you set, the harder

the exception will be detected.

4. Click

to set handling method of video

tampering. Set arming schedule and alarm response

actions of the channel.

1) Click Arming Schedule tab to set the arming

schedule of response action.

2) Choose one day of a week and up to eight

time periods can be set within each day.

Time periods shall not be repeated or

overlapped.

3) Select Linkage Action tab to set alarm

response actions of video tampering alarm

(Refer to Setting Alarm Response Actions).

Repeat the above steps to set arming

schedule of other days of a week. You can

also use Copy button to copy an arming

schedule to other days.

4) Click the OK button to complete the video

tampering settings of the channel.

5. Click the Apply to save and activate settings.

6. (Optional) you can copy the same settings to

other cameras by clicking the Copy button

NOTE