Operation Manual

Page 57
ALARM SETTINGS
Setting Alarm Response Actions
NOTE
:
Take alarm response actions will be activated when an alarm or exception
occurs, including Full Screen Monitoring, Audible Warning (buzzer), Notify
Surveillance Center, Send Email and Trigger Alarm Output.
Full Screen Monitoring
When an alarm is triggered, the local monitor (HDMI, VGA) display in full screen the
video image from the alarming channel configured for full screen monitoring.
If alarms are triggered simultaneously in several channels, their full-screen images
will be switched at an interval of 10 seconds (default dwell time). A different
dwell time can be set by going to Menu > Configuration > Live View.
Auto-switch will terminate once the alarm stops and you
will be taken back to the Live View interface.
Audible Warning
Trigger an audible beep when an alarm is detected.
Notify Surveillance Center
Sends an exception or alarm signal to remote alarm host when an event
occurs. The alarm host refers to the PC installed with Remote Client.
The alarm signal will be transmitted automatically at detection mode when
remote alarm host is configured. Please refer to Chapter 9.2.6 Configuring
the Remote Alarm Host for details of alarm host configuration.
Send Email
Send an email with alarm information to a user or users when an alarm is detected.
(Refer to Configuring Email for details of Email configuration.)