Operation Manual

Page 68
Configuring Network Detection
Testing Network Delay and Packet Loss
Enter the Network Traffic interface:
Menu > Maintenance > Net Detect > Network Detection.
1. Enter Destination Address.
2. Click Test.
You can obtain network connecting status of DVR through the network
detection function, including network delay, packet loss, etc.
Clicking Test will display one of the following messages.
NETWORK SETTING
NOTE
:
Exporting Network Packet
By connecting the DVR to network, the captured network
data packet can be exported to USB-flash disk, SATA and
other local backup devices.
Enter the Network Traffic interface:
Menu > Maintenance > Net Detect > Network Detection.
1. Select backup device from Device Name dropdown list
Click Refresh if the connected local backup
device cannot be displayed. When it fails to
detect the backup device, please check whether
it is compatible with the DVR. You can format the
backup device if the format is incorrect.
3. Click Export.
4. After export is complete, click OK.
NOTE
:
Up to 1M data can be exported each time.
NOTE
: