Operation Manual

Page 73

HDD MANAGEMENT

5. Select HDD from the list and click icon to enter the Local HDD settings interface.

6. Select the Group number for the current HDD.

NOTE

The default group No. for each HDD is 1.

7. Click OK to conﬁrm the settings.

8. Click Yes to ﬁnish the settings.

Setting HDD Property

Before you start

Set storage mode to Group before setting the HDD property.

The HDD property can be set to

redundancy, read-only or read/write (R/W).

A HDD can be set to read-only to prevent important

recorded ﬁles from being overwritten when the HDD

becomes full in overwrite recording mode.

When the HDD property is set to redundancy, the video

can be recorded both onto the redundancy HDD and the

R/W HDD simultaneously so as to ensure high security and

reliability of video data.

1. Enter the HDD Information interface:

Menu > HDD > General

2. Select HDD from the list and click the

icon to enter

the Local HDD Settings interface.

3. Set the HDD property to R/W, Read-only or Redundancy.

4. Click the OK button to save the settings and exit the

interface.

5. In the HDD Information menu, the HDD property will be

displayed in the list.

At least 2 hard disks must be added on

your DVR when you want to set a HDD to

Redundancy, and there is one HDD with R/W

property.

NOTE