Operation Manual

Page 76

HDD MANAGEMENT

Conﬁguring HDD Error Alarms

You can conﬁgure the HDD error alarms when the

HDD status is Uninitialized or Abnormal.

Conﬁgure the HDD through the Exception interface:

Menu > Conﬁguration > Exceptions.

1. Select the Exception Type to HDD Error from the

dropdown list.

2. Check the checkbox(s) below to select the linkage action(s)

for HDD error

The linkage actions can be selected to:

Audible Warning, Notify Surveillance Center, Send Email and

Trigger Alarm Output.

(Refer to Chapter Setting Alarm Response Actions.)

3. When the Trigger Alarm Output is selected, you can also

select the alarm output to be triggered from the list below.

4. Click Apply