Operation Manual

Page 87
User Account Management
There is a default account in the DVR: Administrator. The Administrator user name is admin and the password is
12345. The Administrator has the permission to add and delete user and configure user parameters.
Adding a User
Access the User Management interface: Menu > Configuration > User and then click Add.
Enter the new user’s information, click Apply and then click OK.
Level options include Guest or Operator.
• By default, Operator can use two-way audio in remote configuration
and has all operating permission in camera configuration.
• By default, Guest only has permission for local/remote playback in
camera configuration.
The MAC address of the remote PC that logs into the DVR. If
configured and enabled, it only allows the remote user with this MAC
address to access the DVR.
Click OK to save the settings.
The new user will appear in this screen. Click the
button to enter permission settings.
DVR MANAGEMENT AND MAINTENANCE