Spec Sheet

ManualsBrandsBRK ManualsFurnacesPC1210 - Smoke and Carbon Monoxide Alarm - Sealed Battery

CAT.

PRC710B

LOW PROFILE DESIGN

Sleek, contemporary design blends into

any décor.

10-YEAR

LITHIUM POWER

10 years of continuous protection.

No battery change required. Provides

audible notice when alarm has reached

its end of life.

TAMPERPROOF

SEALED ALARM

Powercell cannot be removed.

ELECTROCHEMICAL CO

SENSOR

Most accurate technology available for

detecting carbon monoxide as com-

pared to other sensing technologies.

PHOTOELECTRIC

Photoelectric technology is generally

more sensitive at detecting large par-

ticles, which tend to be produced in

greater amounts by smoldering ﬁres.

SILENCE FEATURE

Silences nuisance alarms.

Sealed 3V Lithium Power Cell

10-YEAR SEALED

SMOKE & CO

COMBO

ALARM

Description:

BRK PRC710B (model PC1210) is a 3V lithium power cell single station photo-

electric smoke and carbon monoxide combination alarm speciﬁcally designed for

residential and institutional applications including sleeping rooms of hospitals, ho-

tels, motels, dormitories, and other multifamily dwellings as deﬁned in standard

NFPA 101. BRK PRC710B has been fully tested and complies with, UL217, UL2034,

CSFM, NFPA 72, NFPA 720, NFPA 101 and other agencies that model their codes

after the above agencies. It meets building codes where tamperproof 10-year

sealed lithium battery operated photoelectric smoke and carbon monoxide com-

bination alarms are required and with model building codes published by the ICC.

BRK PRC710B is a state of the art smoke and CO combination alarm designed to

provide early warning of a ﬁre or carbon monoxide danger. It features a photoelec-

tric smoke sensing chamber, an electrochemical CO sensor and a sealed 10-year

lithium power cell power supply that is permanently installed. The tamperproof de-

sign will not allow the powercell to be removed. The low power warning indicator

will cause the alarm to “chirp” when it reaches the end of its service life and needs

to be replaced. Upon end of life, the unit meets UL requirements for disabling the

alarm and non-reinstallation of unit to mounting bracket. It also features a tamper

resistant locking pin that locks the alarm to the mounting bracket to prevent remov-

al of the alarm. Perfect for apartment, dormitory or hotel applications. The sleek,

low proﬁle design complements any décor. Designed for wall or ceiling mount-

ing. Includes mount-

ing anchors and

screws.

Summary of content (2 pages)

PAGE 1
SMOKE & CO COMBO A LARM 1 0 -Y E A R S E A L E D CAT. PRC710B Sealed 3V Lithium Power Cell Description: LOW PROFILE DESIGN Sleek, contemporary design blends into any décor. 10-YEAR LITHIUM POWER 10 years of continuous protection. No battery change required. Provides audible notice when alarm has reached its end of life. TAMPERPROOF SEALED ALARM Powercell cannot be removed.
PAGE 2
CAT. PRC710B TOP VIEW TECHNICAL SPECS Alarm Dimensions: Weight: Operating Voltage: Temperature Range: Humidity Range: Audio Alarm: Test/Silence: MOUNTING BRACKET SIDE VIEW 5.7” 1.28” ARCHITECTURAL AND ENGINEERING SPEC The smoke and CO combination alarm shall be a BRK Model PC1210 (cat. no. PRC710B) and shall provide at a minimum the following features and functions: 1. A Photoelectric smoke sensing chamber and an electrochemical CO sensor. 2.