Operating Instructions

17
Getting Started
3 Open the display
A
Pull out the handle.
l
If you do not pull out the handle before opening the
display, the computer may fall over due to the weight
of the display.
B
Push down on the latch (B), and pull it out to release it.
C
Hold the corners with both hands, and lift the display
slightly.
D
Hold the side of the computer with either of your hands
and then lift up the display to open.
CAUTION
l
Do not open the display wider than necessary (180° or
more), and do not apply excessive pressure to the LCD. Do
not open or close the computer holding the edge of the LCD
segment.
4 Turn on the computer
Press and hold the power switch (C) until the power indicator
(D) lights.
CAUTION
l
Do not press the power switch repeatedly.
l
The computer will be forcibly turned o󰀨 if you press and hold
the power switch for four seconds or longer.
l
Do not perform the following operation until the First-time
Operation is completed.
Touching the release lever (E) and detach lock (F)
Detaching the tablet from keyboard base
Connecting or disconnecting the AC adaptor
Pressing the power switch
Closing the display
Any changes from the default setting of the Setup Utility
l
Once you turn o󰀨 the computer, wait for ten seconds or more
before you turn on the computer again.
l
When the CPU temperature is high, the computer may not
start up to prevent overheating of the CPU. Wait until the
computer cools down, and then turn the power on again. If
the computer does not power on even after cooling down,
contact Panasonic Technical Support (
è
OPERATING
INSTRUCTIONS - Reference Manual”).
3
2
3
4
1
B
C
D
E
F
4