Installation manual

Revision F • 3/12
HARRIS CORPORATION
3-1
3
The HDE-200 does not need to be networked
with an admin computer during normal operation,
but a WinXP (SP2 or later), Vista (Business or Ulti-
mate), or Windows 7 (Ultimate or Pro) computer is
needed to configure and monitor the HDE-200
using the
Exporter Control Center program (the ECC
app). The ECC app is supplied with each HDE-200
on a USB flash drive. The ECC app can also be down-
loaded from the Harris Broadcast Customer Portal
(see page 5-1 for website access details).
3.1 ECC App Overview
The ECC app has two main functions: to con-
figure HDE-200 Exporter operational parameters;
and to allow multiple users to remotely monitor
and/or control one or more HDE-200 Exporters.
The ECC app can be run concurrently on any num-
ber of computers on your network, if desired.
NOTE: ECC app security is NOT
turned on during installation (for easy
ECC app and HDE-200 Exporter
setup). If security will be used, assign
Users to the four User Groups before
clicking Enable Security, in the Sys-
tem
> Preferences pop-up window, to
activate User Group security.
Software
If security is enabled in the ECC app, there are
five security levels that allow varying levels of ac-
cess and control over the ECC app and any net-
worked HDE-200 Exporters.
Four User Groups are added to the Windows
operating system when the ECC app is installed.
The various user group members are assigned us-
ing the standard Windows Manage Local Users
and Groups function.
The four User Groups, summarized in the table
below, allow specific program access and control
to be assigned to each ECC user using your
facility’s computer login names and passwords.
If someone logs into a computer and starts the
ECC app, but is not a member of any of the groups,
then that person is a No Credentials user with lim-
ited control over the ECC app and no control over
any HDE-200. Here is a summary of the control
functionality for the four HDE-200 User Groups
and a non-credentialed user:
User Group Description
No Credentials Can select & view any
HDE-200
Censor Can select & view any
HDE-200 and issue
Profanity dumpcommands
User Can select & view any
HDE-200 and control
normaloperational
features on the HDE-200
Engineer Has control over most
HDE-200 configurations,
but cannot make network
changes
Commissioner Has full control over the
HDE-200 configuration,
including network
configuration changes