Installation manual

Revision F • 3/11
HARRIS CORPORATION
3-3
3 Control Center Software
3.2 Installing the ECC App
The ECC app is supplied on a USB 2.0 flash
drive (Harris p/n 7320514000-1), along with
other administration apps and PDF files.
The illustrations used in the following instruc-
tion show WinXP screens. When the ECC app is
installed on a Windows 7 computer, see the Har-
ris App Note AN10-02 ECC & Windows 7 (in-
cluded as Appendix A) for installation tips per-
taining specifically to Windows 7.
1. Locate the HDE-200 installation file on the
USB flash drive (F:\Software_Install_Pkg\
Harris\Exporter Control Center\72-
1441rN_ECC_ Installer_ V1.2.16.msi)
2. Launch the installation file by double click-
ing the .msi file.
3. Click
Next to open the Select Installation
Folder
screen. For best results, use the de-
fault file location. Before continuing, set the
program access. Use
Just Me (default) if the
currently logged-in administrator is the only
one using the app on that computer. Use
Ev-
eryone
when multiple users will log into the
computer and need to access ECC.
4. Continue the installation by clicking
Next
on the Select Installation Folder screen and
on the following screen. Once the installa-
tion completes, click
Close to close the in-
staller window.
3.2.1 USER GROUP SETUP
The ECC app automatically creates four Win-
dows User Groups to allow different users to have
varying access to the ECC app’s features. If the
ECC app is only used on an access-controlled com-
puter, and only accessed by station engineers, then
these four User Groups do not need to be assigned.
But, in this case, DO NOT CLICK on Enable Se-
curity, in the
System > Preferences pop-up win-
dow to run the ECC app without security.
The HDE-200 User Groups are maintained even
if the ECC app is removed from the computer so a
new app version can be installed maintaining the
same User Groups. These instructions pertain to
WinXP computers, see Appendix A for steps spe-
cific to Windows 7 and Vista computers.
NOTE: Only a computer Administra-
tor
can add or remove users in the
HDE-200 user groups.