Installation manual

Revision F • 3/12
HARRIS CORPORATION
3-22
3 Control Center Software
Windows Users and Groups to control access to
the ECC app features. You must log into the ECC
app, using your User Credentials as an Engineer
or Commissioner, to then make any new changes
on the HDE-200 configuration.
3.5.6 HELP
There are two options under help: About and
Check for Updates. Selecting About lists the ver-
sion of the ECC app.
Selecting Check for Updates opens Internet
Explorer on the Harris corporate web site
(www.harris.com), which is only useful if the ECC
app is on a PC connected to the Internet. Since, in
most cases, the admin computer is not connected
to the Internet, to check for updates, use a com-
puter connected to the Internet and navigate to:
http://support.broadcast.harris.com/
Using the Harris Customer Portal requires reg-
istration. If you already are registered, enter your
username and password. A new user must select
New User in the
Customer Login window and com-
plete the registration process.
Once you have access to the Harris Customer
Portal, under
Self Service click Download Soft-
ware Updates >
Radio Transmission > HD FM >
HDE-200 Exporter
to locate the files pertaining
to the HDE-200 and ECC app.
3.6 Supplemental Software
Several software utilities, app notes, and other
files are provided on the HDE-200 USB flash drive.
Copy these to the admin computer for reference.
These files can also be downloaded from the Har-
ris Customer Portal website as well:
Software supplied by Harris
· HDE-200 Logger Utility
Software supplied by iBiquity Digital
· PSDGen 4.7 package (executable binaries)
3.6.1 HDE-200 LOGGER UTILITY
This utility receives log messages from the ECC
app and from the HDE-200 devices. The logger
collects these messages, filters them, and then for-
wards important ones to the Windows Event da-
tabase. The utility should be run on the FlexStar
network admin computer at startup. It typically
resides as an icon in the system tray.
3.6.1.1 Installation
Locate and open the LogInstall.msi file on the
HDE-200 Flash Drive. Select Install for Everyone
during the installation.
About ECC Pop-Up Window
Help Menu
Check for Updates Opens the Harris Webpage