Specifications

6
Silence Sensor Setup Table 2
J1/J2 in place L+R – default
J1 in place J2 removed Left only causes silence sensing
J1 Removed J2 in place Right only causes silence sensing
Remote Control Pin out Table 3
Pin 1 +15 VDC @100mA.
Pin 2 No Connection
Pin 3 Select B Input
Pin 4 Select A Input
Pin 5 Error Reset
Pin 6 Status Relay Common
Pin 7 Status – “B” Selected
Pin 8 Status - “A” Selected
Pin 9 Ground
Command input pins 3, 4, 5 require a momentary closure to ground. Status connections are to dry contacts.
Use no more than 24 VDC on these contacts or damage to the relay can occur.