User's Manual

16
5 Controlling the System 3.2 Mounting Instructions
RF POWER BUTTON
 Power on the power amplifier
When the power amplifier is turned off push the button labelled “RF” to switch
on the power amplifier of the transmitter. The display lights green.
 Power off the power amplifier
When the power amplifier is turned on push the button labelled “RF” to switch
on the power amplifier of the transmitter. The display lights orange.
Caution
Before switching on the power amplifier ensure the antenna is connected
properly. Otherwise the transmitter may get damaged.
DIMMING THE DISPLAY
Press the button labelled “DIM” to reduce the brightness of the display.
Note
The control panel is night vision capable per MIL-L85762A and complies with
MIL STD 3009.
ACTUATOR CONTROL (OPTIONAL)
 Stow antenna for landing
Shift the switch labelled “ACTUATOR” to the position “UP” in order to move
the antenna to horizontal position and stow the antenna for landing. The
green LED lights up
 Bring antenna into flight position
Shift the switch labelled “ACTUATOR” to the position “DOWN” in order to
move the antenna to vertical position. The amber LED lights up. In this
position the best transmission signal is achieved.
Caution
Before landing make sure the antenna is moved into horizontal position.
Otherwise the antenna and/or actuator may get damaged.
Note
The actuator switch is secured. Before shifting pull it slightly and release it from
the interlock.