User's Manual

Chapter 4: Operating the Equipment
Reference Guide: CT6020HD Page 27
March 09
Sony camera with Sony V-mount bracket attached
Note
The V-mount bracket for Sony cameras is part of the Sony
viewfinder and not separately available!
4.2 Mounting instructions for CT6020HD on the Sony
1500 camera
1. In the menu of the Sony 1500 camera the user has the possibility to configure
all connectors at the camera. Please configure the SDI connector in the camera-
menu. Set the SDI connector to HD-SDI output. Before you proceed to the next
step, please make sure which kind of HD video signal you get at the output
connector of the camera. The best way to check this, is to connect the
programmed output connector of the HD camera with a HD-control monitor
which will show the user the parameter of the video signal at the camera
output.
Note
The HD video parameter of the camera has to comply with the
parameter of the transmitter. Please check the output video signal
before proceeding.