User's Manual

Chapter 4: Operating the Equipment
Reference Guide: CT6020HD Page 32
March 09
6. Now you can connect the cables to the transmitter.
Connect the remote cable to the “Data”, (4pol Lemo), the audio cable from the
microphone to the “Audio” (5pol Lemo) and the HD-SDI video cable to the “SDI”
connector.
7. The next step will be to turn on the camera and the transmitter.
Caution
• Be sure that the antennas are fixed
• Be sure that all the cables are connected
Now push the battery into the V-mount adaptor until it snaps in. After you
attached the battery the transmitter will start automatically. If the camera is
turned off please turn the camera on.