User's Manual

6051412900 Rev -

Controlling the CARRY-CODER II Transmitter

Control Unit Features

• The CARRY-CODER II control unit is designed for the convenience of the user.

• The control unit can be attached or disconnected at any time.

• Easily readable four line display.

• Operator navigation of menu with four intuitive directional buttons.

• Operational command entry using the <OK> button.

• Display includes status icons at right portion of top line.

• Text menu line one displays operating frequency.

• Text menu lines two and three are for system control functions.

• Text menu line four displays system status.

Transmitter Operating Configuration

When the CARRY-CODER II is powered up for the first time, the operator can easily review the operating parameters using the

control unit. Here is a listing of the parameters, in operating menu sequence.

• RF Output Operating Frequency (.25 or .5 MHz Steps depending on Frequency or BAS Band Channel with Operating

Frequency).

• RF Output Power (OFF LOW MID HIGH MAX).

• Transmission Mode Robustness (LOW MID HIGH).

• Recall Configuration (Presets 1 to 9).

• Save Configuration (Presets 1 to 9).

• Video Input (CVBS, YUV, ASI, SDI).

• Video Mode (PAL, NTSC).

• Audio Input (analog, AES, SDI).

• Audio Level Left

• Audio Level Right

• Data Port Baud Rate (1.2, 4.8, 9.6 Kbps)

• Encryption (OFF or PIN code entry).

• User Mode (NORMAL, EXPERT)

PLEASE THOROUGHLY REVIEW SECTION 0 BEFORE USING <EXPERT> Mode.