User's Manual

6051412900 Rev -
13
Setting Transmitter Operating Frequency
CARRY-CODER II Using Direct Frequency Entry
The RF frequency is set as follows:
6454.25 MHz Ψ
▌▌▌▌
FREQUENCY
2454.25 MHz
The frequency display is expressed in MHz with 250 kHz tuning steps. The frequency value corresponds to the center of the 8 MHz
RF channel that is used for transmission. If the user tries to enter a value which is not in the operating frequency range, an “Out of
range” message is displayed and the current frequency value is not changed.
CARRY-CODER II for Broadcast
The RF operating frequency is set using the channel plan with frequency offset.
CH 3- 2029.25 MHz
FREQUENCY
2029.25 MHz
Versions of the CARRY-CODER II are available for several dedicated operating frequency ranges. Refer to the serial identification
plate for the specific frequency range for your CARRY-CODER II. These are the US channels table and corresponding frequencies.
Ch - (0) +
A 6431.25 6437.5 6443.75
B 6456.25 6462.5 6468.75
C 6481.25 6487.5 6493.75
6 GHz Channel
Plan
Low Band
6425-6525 MHz
D 6506.25 6512.5 6518.75
The CARRY-CODER II will not transmit without video. The CARRY-CODER II will reinitialize once video signal
begins.