User's Manual

REAL FREEDOM SYSTEM
Model IDT-4349-3U
UMA-0004-00 11
3. OPERATING INSTRUCTIONS
3.1 General
There are no controls on the Real Freedom Data Transmitter. As soon as power is
supplied via the data cable the unit will start operating.
The Real Freedom Receiver will automatically detect the Data Transmitter when it is
connected to the system and configure itself appropriately. Transmit frequency and
output power can be controlled from the Receveir.
3.2 Changing the Transmit Frequency
The Data Transmitter may be tuned across the range 430 to 490 MHz by using the Real
Freedom Receiver front panel controls. Please see the Receiver Operating manual for
details.
3.3 Changing Output Power
The Data Transmitter may be set to low, medium or high output power by using the Real
Freedom Receiver front panel controls. Please see the Receiver Operating manual for
details.
WARNING
The end user is responsible for ensuring that they are properly licensed to
operate at the frequency and output power selected