Specifications

e-mail: [e-mail] voice: 360.854.9559 fax: [phone]
33
WVRC-4 Installation and Operation Manual
WEB SETUP
Analog Setup Dialog
Analog Label Changes the label associated with any of the analog registers.
Units Changes the units label associated with any of the analog registers.
Current Value Sets the analog scaling factor by associating the current A/D
value with the user-supplied value.
Low Alert A low alert is issued when the analog value falls below this value.
High Alert A high alert is issued when the analog value exceeds this value.
Alert Flag Enables alerts for this analog register.
Email Recipients Specifies which e-mail recipients receive the alert.
Set Sets parameters for the analog channel using the current actual value.
Close Exit the analog setup dialog.
NOTE: The analog value portion of the display will flash for any channel in an
alarm condition and will cause the PC to beep if enabled.
Status/Relay Setup Dialog
Raise Relay Label Changes the label associated with any of the raise relays
Lower Relay Label Changes the label associated with any of the lower relays
Status Indicator Label Changes the label associated with any of the status items
WEBSITE:
Visit our web site for
product updates and
additional information.