User`s guide

Chapter 11: Playlist Window 169
• Item Toolbar
• Video Toolbar
• Custom Toolbar
• To create a new playlist filter
• Viz Template Wizard User’s Guide on Categories and Channels.
11.1.3 Video Toolbar
The Video toolbar is not displayed by default, and is only available for MVCP
integrations, hence, it is not used for the Viz Video Hub integration.
When selected, the Video toolbar is by default positioned below the Playlist
toolbar.
Note: The Video Toolbar settings only work if the system is configured to be
integrated with a video server.
• On Air: Sets the playlist in On Air mode. When the playlist is set to On Air an
On Air icon appears in the Media Sequencer Playlists list.
• Allocate: Automatic channel allocation starts, the first clips are cued up, and
the external cursor is set to the first story that contains a video clip.
• Off Air: Sets the playlist in Off Air mode.
•Auto Cue:
• Enable Auto Cue: Enables the automatic channel allocation.
• Disable Auto Cue: Disables the automatic channel allocation.
See Also
• Playlist Toolbars
• Item Toolbar
• Playlist Toolbar
• Custom Toolbar
• Example
Example
If a playlist uses two channels (A and B) and the playlist is set in On Air mode, the
first clips allocated to these channels will be cued. Channel A is taken On Air by a
vision mixer GPI (advance and take). This also takes the studio tally (red light on
monitors) high. This is received by the Media Sequencer as a GPI, and the TC (time
code) monitor indicates high tally on that channel. The vision mixer cuts to
camera or to another video source. This takes tally low on that channel, and the
Media Sequencer receives a GPI low signal. After 5 seconds, the tally goes low,
and the next clip allocated to that channel will be cued.