User`s guide

200 Chapter 12: Newsroom Integration
CAUTION! Changing registry settings may cause the system to become unstable.
See Also
• Configuring Remote Preview
12.1.11 Configuring Remote Preview
This section contains information on the following topics:
• To configure remote preview with registry settings
• To configure remote preview with database settings
To configure remote preview with registry settings
1. Open the Registry Editor
2. Locate the TemplateFiller key
• Windows 32-bit: HKEY_LOCAL_MACHINE\SOFTWARE\[vizrt]\ActiveX
5.x\TemplateFiller\
• Windows 64-bit: HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\
[vizrt]\ActiveX 5.x\TemplateFiller\
3. Add PreviewHost as a string
4. Add PreviewPort as a string
5. If preview has been disabled, set PreviewDisabled to 0.
Note: If Local Viz Preview has been used, the Newsroom Component should be
reinstalled and the Viz Engine Preview plug-in removed.
To configure remote preview with database settings
1. Start the Viz Content Pilot client
2. Select Preferences from the Options menu.
3. Select the Advanced option in the Preferences window.
4. Add or edit the ax_preview_host and ax_preview_port parameters.
PreviewPort <port> Defatult ports are 50008 (multiple
connections) and 6100 (single
connection).
<port> defines the Viz Engine port
number, or Viz Multiplexer port number
for Viz Engine 2.x users, for remote
preview.
PreviewDisabled 0 or 1 Enables (0) or disables (1) both local and
remote preview for the Newsroom
Component.
Table 29: Newsroom Component registry properties
Property Parameter Description